[vim] up/down/left/right options to take boolean values

When 1 is given, 50% of the screen width or height will be used as the
default size of the pane.

.travis.yml

@@ -1,11 +1,15 @@
 language: ruby
+rvm:
+- 2.2.0
 
 install:
 - sudo apt-get update
 - sudo apt-get install -y libncurses-dev lib32ncurses5-dev
 - sudo add-apt-repository -y ppa:pi-rho/dev
+- sudo apt-add-repository -y ppa:fish-shell/release-2
 - sudo apt-get update
 - sudo apt-get install -y tmux=1.9a-1~ppa1~p
+- sudo apt-get install -y zsh fish
 
 script: |
   export GOROOT=~/go1.4

CHANGELOG.md

@@ -0,0 +1,60 @@
+CHANGELOG
+=========
+
+0.9.4
+-----
+
+### New features
+
+#### Added `--tac` option to reverse the order of the input.
+
+One might argue that this option is unnecessary since we can already put `tac`
+or `tail -r` in the command pipeline to achieve the same result. However, the
+advantage of `--tac` is that it does not block until the input is complete.
+
+### *Backward incompatible changes*
+
+#### Changed behavior on `--no-sort`
+
+`--no-sort` option will no longer reverse the display order within finder. You
+may want to use the new `--tac` option with `--no-sort`.
+
+```
+history | fzf +s --tac
+```
+
+### Improvements
+
+#### `--filter` will not block when sort is disabled
+
+When fzf works in filtering mode (`--filter`) and sort is disabled
+(`--no-sort`), there's no need to block until input is complete. The new
+version of fzf will print the matches on-the-fly when the following condition
+is met:
+
+    --filter TERM --no-sort [--no-tac --no-sync]
+
+or simply:
+
+    -f TERM +s
+
+This change removes unnecessary delay in the use cases like the following:
+
+    fzf -f xxx +s | head -5
+
+However, in this case, fzf processes the lines sequentially, so it cannot
+utilize multiple cores, and fzf will run slightly slower than the previous
+mode of execution where filtering is done in parallel after the entire input
+is loaded. If the user is concerned about this performance problem, one can
+add `--sync` option to re-enable buffering.
+
+0.9.3
+-----
+
+### New features
+- Added `--sync` option for multi-staged filtering
+
+### Improvements
+- `--select-1` and `--exit-0` will start finder immediately when the condition
+  cannot be met
+

README.md

@@ -14,16 +14,17 @@ Installation
 fzf project consists of the followings:
 
 - `fzf` executable
+- `fzf-tmux` script for launching fzf in a tmux pane
 - Shell extensions
     - Key bindings (`CTRL-T`, `CTRL-R`, and `ALT-C`) (bash, zsh, fish)
-    - Fuzzy auto-completion (bash)
+    - Fuzzy auto-completion (bash only)
 
 You can [download fzf executable][bin] alone, but it's recommended that you
 install the extra stuff using the attached install script.
 
 [bin]: https://github.com/junegunn/fzf-bin/releases
 
-### Using git (recommended)
+#### Using git (recommended)
 
 Clone this repository and run
 [install](https://github.com/junegunn/fzf/blob/master/install) script.
@@ -33,7 +34,7 @@ git clone https://github.com/junegunn/fzf.git ~/.fzf
 ~/.fzf/install
 ```
 
-### Using curl
+#### Using curl
 
 In case you don't have git installed:
 
@@ -44,7 +45,7 @@ curl -L https://github.com/junegunn/fzf/archive/master.tar.gz |
 ~/.fzf/install
 ```
 
-### Using Homebrew
+#### Using Homebrew
 
 On OS X, you can use [Homebrew](http://brew.sh/) to install fzf.
 
@@ -52,10 +53,10 @@ On OS X, you can use [Homebrew](http://brew.sh/) to install fzf.
 brew install fzf
 
 # Install shell extensions - this should be done whenever fzf is updated
-/usr/local/Cellar/fzf/$(fzf --version)/install
+$(brew info fzf | grep /install)
 ```
 
-### Install as Vim plugin
+#### Install as Vim plugin
 
 Once you have cloned the repository, add the following line to your .vimrc.
 
@@ -63,7 +64,8 @@ Once you have cloned the repository, add the following line to your .vimrc.
 set rtp+=~/.fzf
 ```
 
-Or you can have [vim-plug](https://github.com/junegunn/vim-plug) manage fzf:
+Or you can have [vim-plug](https://github.com/junegunn/vim-plug) manage fzf
+(recommended):
 
 ```vim
 Plug 'junegunn/fzf', { 'dir': '~/.fzf', 'do': 'yes \| ./install' }
@@ -72,47 +74,6 @@ Plug 'junegunn/fzf', { 'dir': '~/.fzf', 'do': 'yes \| ./install' }
 Usage
 -----
 
-```
-usage: fzf [options]
-
-  Search
-    -x, --extended        Extended-search mode
-    -e, --extended-exact  Extended-search mode (exact match)
-    -i                    Case-insensitive match (default: smart-case match)
-    +i                    Case-sensitive match
-    -n, --nth=N[,..]      Comma-separated list of field index expressions
-                          for limiting search scope. Each can be a non-zero
-                          integer or a range expression ([BEGIN]..[END])
-        --with-nth=N[,..] Transform the item using index expressions for search
-    -d, --delimiter=STR   Field delimiter regex for --nth (default: AWK-style)
-
-  Search result
-    -s, --sort            Sort the result
-    +s, --no-sort         Do not sort the result. Keep the sequence unchanged.
-
-  Interface
-    -m, --multi           Enable multi-select with tab/shift-tab
-        --no-mouse        Disable mouse
-    +c, --no-color        Disable colors
-    +2, --no-256          Disable 256-color
-        --black           Use black background
-        --reverse         Reverse orientation
-        --prompt=STR      Input prompt (default: '> ')
-
-  Scripting
-    -q, --query=STR       Start the finder with the given query
-    -1, --select-1        Automatically select the only match
-    -0, --exit-0          Exit immediately when there's no match
-    -f, --filter=STR      Filter mode. Do not start interactive finder.
-        --print-query     Print query as the first line
-        --sync            Synchronous search for multi-staged filtering
-                          (e.g. 'fzf --multi | fzf --sync')
-
-  Environment variables
-    FZF_DEFAULT_COMMAND   Default command to use when input is tty
-    FZF_DEFAULT_OPTS      Defaults options. (e.g. '-x -m')
-```
-
 fzf will launch curses-based finder, read the list from STDIN, and write the
 selected item to STDOUT.
 
@@ -128,34 +89,16 @@ files excluding hidden ones. (You can override the default command with
 vim $(fzf)
 ```
 
-If you want to preserve the exact sequence of the input, provide `--no-sort` (or
+#### Using the finder
-`+s`) option.
 
-```sh
+- `CTRL-J` / `CTRL-K` (or `CTRL-N` / `CTRL-P)` to move cursor up and down
-history | fzf +s
+- `Enter` key to select the item, `CTRL-C` / `CTRL-G` / `ESC` to exit
-```
+- On multi-select mode (`-m`), `TAB` and `Shift-TAB` to mark multiple items
+- Emacs style key bindings
+- Mouse: scroll, click, double-click; shift-click and shift-scroll on
+  multi-select mode
 
-### Keys
+#### Extended-search mode
-
-Use CTRL-J and CTRL-K (or CTRL-N and CTRL-P) to change the selection, press
-enter key to select the item. CTRL-C, CTRL-G, or ESC will terminate the finder.
-
-The following readline key bindings should also work as expected.
-
-- CTRL-A / CTRL-E
-- CTRL-B / CTRL-F
-- CTRL-H / CTRL-D
-- CTRL-W / CTRL-U / CTRL-Y
-- ALT-B / ALT-F
-
-If you enable multi-select mode with `-m` option, you can select multiple items
-with TAB or Shift-TAB key.
-
-You can also use mouse. Double-click on an item to select it or shift-click (or
-ctrl-click) to select multiple items. Use mouse wheel to move the cursor up and
-down.
-
-### Extended-search mode
 
 With `-x` or `--extended` option, fzf will start in "extended-search mode".
 
@@ -174,40 +117,12 @@ such as: `^music .mp3$ sbtrkt !rmx`
 If you don't need fuzzy matching and do not wish to "quote" every word, start
 fzf with `-e` or `--extended-exact` option.
 
-Useful examples
+Examples
----------------
+--------
 
-```sh
+Many useful examples can be found on [the wiki
-# fe [FUZZY PATTERN] - Open the selected file with the default editor
+page](https://github.com/junegunn/fzf/wiki/examples). Feel free to add your
-#   - Bypass fuzzy finder if there's only one match (--select-1)
+own as well.
-#   - Exit if there's no match (--exit-0)
-fe() {
-  local file
-  file=$(fzf --query="$1" --select-1 --exit-0)
-  [ -n "$file" ] && ${EDITOR:-vim} "$file"
-}
-
-# fd - cd to selected directory
-fd() {
-  local dir
-  dir=$(find ${1:-*} -path '*/\.*' -prune \
-                  -o -type d -print 2> /dev/null | fzf +m) &&
-  cd "$dir"
-}
-
-# fh - repeat history
-fh() {
-  eval $(([ -n "$ZSH_NAME" ] && fc -l 1 || history) | fzf +s | sed 's/ *[0-9]* *//')
-}
-
-# fkill - kill process
-fkill() {
-  ps -ef | sed 1d | fzf -m | awk '{print $2}' | xargs kill -${1:-9}
-}
-```
-
-For more examples, see [the wiki
-page](https://github.com/junegunn/fzf/wiki/examples).
 
 Key bindings for command line
 -----------------------------
@@ -231,13 +146,27 @@ If you want to customize the key bindings, consider editing the
 installer-generated source code: `~/.fzf.bash`, `~/.fzf.zsh`, and
 `~/.config/fish/functions/fzf_key_bindings.fish`.
 
-Auto-completion
+`fzf-tmux` script
----------------
+-----------------
 
-Disclaimer: *Auto-completion feature is currently experimental, it can change
+[fzf-tmux](bin/fzf-tmux) is a bash script that opens fzf in a tmux pane.
-over time*
 
-### bash
+```sh
+# usage: fzf-tmux [-u|-d [HEIGHT[%]]] [-l|-r [WIDTH[%]]] [--] [FZF OPTIONS]
+#        (-[udlr]: up/down/left/right)
+
+# select git branches in horizontal split below (15 lines)
+git branch | fzf-tmux -d 15
+
+# select multiple words in vertical split on the left (20% of screen width)
+cat /usr/share/dict/words | fzf-tmux -l 20% --multi --reverse
+```
+
+It will still work even when you're not on tmux, silently ignoring `-[udlr]`
+options, so you can invariably use `fzf-tmux` in your scripts.
+
+Fuzzy completion for bash
+-------------------------
 
 #### Files and directories
 
@@ -306,18 +235,12 @@ export FZF_COMPLETION_TRIGGER='~~'
 export FZF_COMPLETION_OPTS='+c -x'
 ```
 
-### zsh
-
-TODO :smiley:
-
-(Pull requests are appreciated.)
-
 Usage as Vim plugin
 -------------------
 
 (Note: To use fzf in GVim, an external terminal emulator is required.)
 
-### `:FZF[!]`
+#### `:FZF[!]`
 
 If you have set up fzf for Vim, `:FZF` command will be added.
 
@@ -355,7 +278,7 @@ Refer to the [this wiki
 page](https://github.com/junegunn/fzf/wiki/fzf-with-MacVim-and-iTerm2) to see
 how to set up.
 
-### `fzf#run([options])`
+#### `fzf#run([options])`
 
 For more advanced uses, you can call `fzf#run()` function which returns the list
 of the selected items.
@@ -363,18 +286,17 @@ of the selected items.
 `fzf#run()` may take an options-dictionary:
 
 | Option name                | Type          | Description                                                      |
-| --------------- | ------------- | ------------------------------------------------------------------ |
+| -------------------------- | ------------- | ---------------------------------------------------------------- |
 | `source`                   | string        | External command to generate input to fzf (e.g. `find .`)        |
 | `source`                   | list          | Vim list as input to fzf                                         |
 | `sink`                     | string        | Vim command to handle the selected item (e.g. `e`, `tabe`)       |
 | `sink`                     | funcref       | Reference to function to process each selected item              |
 | `options`                  | string        | Options to fzf                                                   |
 | `dir`                      | string        | Working directory                                                |
-| `tmux_width`    | number/string | Use tmux vertical split with the given height (e.g. `20`, `50%`)   |
+| `up`/`down`/`left`/`right` | number/string | Use tmux pane with the given size (e.g. `20`, `50%`)             |
-| `tmux_height`   | number/string | Use tmux horizontal split with the given height (e.g. `20`, `50%`) |
 | `launcher`                 | string        | External terminal emulator to start fzf with (Only used in GVim) |
 
-#### Examples
+##### Examples
 
 If `sink` option is not given, `fzf#run` will simply return the list.
 
@@ -400,7 +322,7 @@ nnoremap <silent> <Leader>C :call fzf#run({
 \         "substitute(fnamemodify(v:val, ':t'), '\\..\\{-}$', '', '')"),
 \   'sink':     'colo',
 \   'options':  '+m',
-\   'tmux_width': 20,
+\   'left':     20,
 \   'launcher': 'xterm -geometry 20x30 -e bash -ic %s'
 \ })<CR>
 ```
@@ -425,18 +347,21 @@ nnoremap <silent> <Leader><Enter> :call fzf#run({
 \   'source':  reverse(BufList()),
 \   'sink':    function('BufOpen'),
 \   'options': '+m',
-\   'tmux_height': '40%'
+\   'down':    '40%'
 \ })<CR>
 ```
 
-### Articles
+More examples can be found on [the wiki
+page](https://github.com/junegunn/fzf/wiki/Examples-(vim)).
+
+#### Articles
 
 - [fzf+vim+tmux](http://junegunn.kr/2014/04/fzf+vim+tmux)
 
 Tips
 ----
 
-### Rendering issues
+#### Rendering issues
 
 If you have any rendering issues, check the followings:
 
@@ -450,7 +375,7 @@ If you have any rendering issues, check the followings:
   `FZF_DEFAULT_OPTS` for further convenience.
 4. If you still have problem, try `--no-256` option or even `--no-color`.
 
-### Respecting `.gitignore`, `.hgignore`, and `svn:ignore`
+#### Respecting `.gitignore`, `.hgignore`, and `svn:ignore`
 
 [ag](https://github.com/ggreer/the_silver_searcher) or
 [pt](https://github.com/monochromegane/the_platinum_searcher) will do the
@@ -467,7 +392,7 @@ export FZF_DEFAULT_COMMAND='ag -l -g ""'
 fzf
 ```
 
-### `git ls-tree` for fast traversal
+#### `git ls-tree` for fast traversal
 
 If you're running fzf in a large git repository, `git ls-tree` can boost up the
 speed of the traversal.
@@ -487,10 +412,12 @@ fzf() {
 }
 ```
 
-### Using fzf with tmux splits
+#### Using fzf with tmux panes
 
-It isn't too hard to write your own fzf-tmux combo like the default
+The supplied [fzf-tmux](bin/fzf-tmux) script should suffice in most of the
-CTRL-T key binding. (Or is it?)
+cases, but if you want to be able to update command line like the default
+`CTRL-T` key binding, you'll have to use `send-keys` command of tmux. The
+following example will show you how it can be done.
 
 ```sh
 # This is a helper function that splits the current pane to start the given
@@ -520,7 +447,7 @@ fzf_tmux_dir() {
 bind '"\C-x\C-d": "$(fzf_tmux_dir)\e\C-e"'
 ```
 
-### Fish shell
+#### Fish shell
 
 It's [a known bug of fish](https://github.com/fish-shell/fish-shell/issues/1362)
 that it doesn't allow reading from STDIN in command substitution, which means
@@ -543,7 +470,7 @@ function fe
 end
 ```
 
-### Handling UTF-8 NFD paths on OSX
+#### Handling UTF-8 NFD paths on OSX
 
 Use iconv to convert NFD paths to NFC:
 

bin/fzf-tmux

@@ -0,0 +1,125 @@
+#!/usr/bin/env bash
+# fzf-tmux: starts fzf in a tmux pane
+# usage: fzf-tmux [-u|-d [HEIGHT[%]]] [-l|-r [WIDTH[%]]] [--] [FZF OPTIONS]
+
+args=()
+opt=""
+skip=""
+swap=""
+close=""
+term=""
+while [ $# -gt 0 ]; do
+  arg="$1"
+  case "$arg" in
+    -)
+      term=1
+      ;;
+    -w*|-h*|-d*|-u*|-r*|-l*)
+      if [ -n "$skip" ]; then
+        args+=("$1")
+        shift
+        continue
+      fi
+      if [[ "$arg" =~ ^.[lrw] ]]; then
+        opt="-h"
+        if [[ "$arg" =~ ^.l ]]; then
+          opt="$opt -d"
+          swap="; swap-pane -D ; select-pane -L"
+          close="; tmux swap-pane -D"
+        fi
+      else
+        opt=""
+        if [[ "$arg" =~ ^.u ]]; then
+          opt="$opt -d"
+          swap="; swap-pane -D ; select-pane -U"
+          close="; tmux swap-pane -D"
+        fi
+      fi
+      if [ ${#arg} -gt 2 ]; then
+        size="${arg:2}"
+      else
+        shift
+        if [[ "$1" =~ ^[0-9]+%?$ ]]; then
+          size="$1"
+        else
+          [ -n "$1" -a "$1" != "--" ] && args+=("$1")
+          shift
+          continue
+        fi
+      fi
+
+      if [[ "$size" =~ %$ ]]; then
+        size=${size:0:((${#size}-1))}
+        if [ -n "$swap" ]; then
+          opt="$opt -p $(( 100 - size ))"
+        else
+          opt="$opt -p $size"
+        fi
+      else
+        if [ -n "$swap" ]; then
+          if [[ "$arg" =~ ^.l ]]; then
+            [ -n "$COLUMNS" ] && max=$COLUMNS || max=$(tput cols)
+          else
+            [ -n "$LINES" ] && max=$LINES || max=$(tput lines)
+          fi
+          size=$(( max - size ))
+          [ $size -lt 0 ] && size=0
+          opt="$opt -l $size"
+        else
+          opt="$opt -l $size"
+        fi
+      fi
+      ;;
+    --)
+      # "--" can be used to separate fzf-tmux options from fzf options to
+      # avoid conflicts
+      skip=1
+      ;;
+    *)
+      args+=("$1")
+      ;;
+  esac
+  shift
+done
+
+if [ -z "$TMUX_PANE" ]; then
+  fzf "${args[@]}"
+  exit $?
+fi
+
+set -e
+
+# Build arguments to fzf
+[ ${#args[@]} -gt 0 ] && fzf_args=$(printf '\\"%s\\" ' "${args[@]}"; echo '')
+
+# Clean up named pipes on exit
+id=$RANDOM
+fifo1=/tmp/fzf-fifo1-$id
+fifo2=/tmp/fzf-fifo2-$id
+fifo3=/tmp/fzf-fifo3-$id
+cleanup() {
+  rm -f $fifo1 $fifo2 $fifo3
+}
+trap cleanup EXIT SIGINT SIGTERM
+
+fail() {
+  >&2 echo "$1"
+  exit 1
+}
+fzf=$(which fzf 2> /dev/null) || fail "fzf executable not found"
+envs="FZF_DEFAULT_OPTS=$(printf %q "$FZF_DEFAULT_OPTS") FZF_DEFAULT_COMMAND=$(printf %q "$FZF_DEFAULT_COMMAND")"
+
+mkfifo $fifo2
+mkfifo $fifo3
+if [ -n "$term" -o -t 0 ]; then
+  tmux set-window-option -q synchronize-panes off \;\
+    split-window $opt "$envs"' sh -c "'$fzf' '"$fzf_args"' > '$fifo2'; echo \$? > '$fifo3' '"$close"'"' $swap
+else
+  mkfifo $fifo1
+  tmux set-window-option -q synchronize-panes off \;\
+    split-window $opt "$envs"' sh -c "'$fzf' '"$fzf_args"' < '$fifo1' > '$fifo2'; echo \$? > '$fifo3' '"$close"'"' $swap
+  cat <&0 > $fifo1 &
+fi
+cat $fifo2
+[ "$(cat $fifo3)" = '0' ]
+

fzf

@@ -8,6 +8,8 @@
 # /_/   /___/_/    Fuzzy finder for your shell
 #
 # Version: 0.8.9 (Dec 24, 2014)
+# Deprecation alert:
+#          This script is no longer maintained. Use the new Go version.
 #
 # Author:  Junegunn Choi
 # URL:     https://github.com/junegunn/fzf
@@ -198,6 +200,8 @@ class FZF
       when '--no-print-query'          then @print_query = false
       when '-e', '--extended-exact'    then @extended = :exact
       when '+e', '--no-extended-exact' then @extended = nil
+      when '--tac', '--sync'
+        # XXX
       else
         usage 1, "illegal option: #{o}"
       end

fzf-completion.bash

@@ -14,17 +14,17 @@ _fzf_orig_completion_filter() {
 }
 
 _fzf_opts_completion() {
-  local cur prev opts
+  local cur opts
   COMPREPLY=()
   cur="${COMP_WORDS[COMP_CWORD]}"
-  prev="${COMP_WORDS[COMP_CWORD-1]}"
   opts="
     -x --extended
     -e --extended-exact
     -i +i
     -n --nth
     -d --delimiter
-    -s --sort +s
+    +s --no-sort
+    --tac
     -m --multi
     --no-mouse
     +c --no-color
@@ -36,14 +36,8 @@ _fzf_opts_completion() {
     -1 --select-1
     -0 --exit-0
     -f --filter
-    --print-query"
+    --print-query
-
+    --sync"
-  case "${prev}" in
-  --sort|-s)
-    COMPREPLY=( $(compgen -W "$(seq 2000 1000 10000)" -- ${cur}) )
-    return 0
-    ;;
-  esac
 
   if [[ ${cur} =~ ^-|\+ ]]; then
     COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
@@ -88,7 +82,7 @@ _fzf_path_completion() {
         [ "$dir" = './' ] && dir=''
         tput sc
         matches=$(find -L "$dir"* $1 2> /dev/null | fzf $FZF_COMPLETION_OPTS $2 -q "$leftover" | while read item; do
-          printf '%q ' "$item"
+          printf "%q$3 " "$item"
         done)
         matches=${matches% }
         if [ -n "$matches" ]; then
@@ -103,6 +97,7 @@ _fzf_path_completion() {
       [[ "$dir" =~ /$ ]] || dir="$dir"/
     done
   else
+    shift
     shift
     shift
     _fzf_handle_dynamic_completion "$cmd" "$@"
@@ -136,19 +131,19 @@ _fzf_list_completion() {
 _fzf_all_completion() {
   _fzf_path_completion \
     "-name .git -prune -o -name .svn -prune -o -type d -print -o -type f -print -o -type l -print" \
-    "-m" "$@"
+    "-m" "" "$@"
 }
 
 _fzf_file_completion() {
   _fzf_path_completion \
     "-name .git -prune -o -name .svn -prune -o -type f -print -o -type l -print" \
-    "-m" "$@"
+    "-m" "" "$@"
 }
 
 _fzf_dir_completion() {
   _fzf_path_completion \
     "-name .git -prune -o -name .svn -prune -o -type d -print" \
-    "" "$@"
+    "" "/" "$@"
 }
 
 _fzf_kill_completion() {
@@ -219,7 +214,7 @@ fi
 
 # Directory
 for cmd in $d_cmds; do
-  complete -F _fzf_dir_completion -o default -o bashdefault $cmd
+  complete -F _fzf_dir_completion -o nospace -o plusdirs $cmd
 done
 
 # File

install

@@ -1,6 +1,6 @@
 #!/usr/bin/env bash
 
-version=0.9.3
+version=0.9.4
 
 cd $(dirname $BASH_SOURCE)
 fzf_base=$(pwd)
@@ -245,7 +245,7 @@ if [ -z "$(set -o | \grep '^vi.*on')" ]; then
   fi
 
   # CTRL-R - Paste the selected command from history into the command line
-  bind '"\C-r": " \C-e\C-u$(HISTTIMEFORMAT= history | fzf +s +m -n2..,.. | sed \"s/ *[0-9]* *//\")\e\C-e\er"'
+  bind '"\C-r": " \C-e\C-u$(HISTTIMEFORMAT= history | fzf +s --tac +m -n2..,.. | sed \"s/ *[0-9]* *//\")\e\C-e\er"'
 
   # ALT-C - cd into the selected directory
   bind '"\ec": " \C-e\C-u$(__fcd)\e\C-e\er\C-m"'
@@ -263,7 +263,7 @@ else
   bind -m vi-command '"\C-t": "i\C-t"'
 
   # CTRL-R - Paste the selected command from history into the command line
-  bind '"\C-r": "\eddi$(HISTTIMEFORMAT= history | fzf +s +m -n2..,.. | sed \"s/ *[0-9]* *//\")\C-x\C-e\e$a\C-x\C-r"'
+  bind '"\C-r": "\eddi$(HISTTIMEFORMAT= history | fzf +s --tac +m -n2..,.. | sed \"s/ *[0-9]* *//\")\C-x\C-e\e$a\C-x\C-r"'
   bind -m vi-command '"\C-r": "i\C-r"'
 
   # ALT-C - cd into the selected directory
@@ -323,7 +323,7 @@ bindkey '\ec' fzf-cd-widget
 
 # CTRL-R - Paste the selected command from history into the command line
 fzf-history-widget() {
-  LBUFFER=$(fc -l 1 | fzf +s +m -n2..,.. | sed "s/ *[0-9*]* *//")
+  LBUFFER=$(fc -l 1 | fzf +s --tac +m -n2..,.. | sed "s/ *[0-9*]* *//")
   zle redisplay
 }
 zle     -N   fzf-history-widget
@@ -412,7 +412,7 @@ function fzf_key_bindings
   end
 
   function __fzf_ctrl_r
-    history | __fzf_reverse | fzf +s +m > $TMPDIR/fzf.result
+    history | __fzf_reverse | fzf +s --tac +m > $TMPDIR/fzf.result
     and commandline (cat $TMPDIR/fzf.result)
     commandline -f repaint
     rm -f $TMPDIR/fzf.result

plugin/fzf.vim

@@ -21,29 +21,35 @@
 " OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
 " WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 
-let s:min_tmux_width  = 10
-let s:min_tmux_height = 3
 let s:default_tmux_height = '40%'
 let s:launcher = 'xterm -e bash -ic %s'
 let s:fzf_go = expand('<sfile>:h:h').'/bin/fzf'
 let s:fzf_rb = expand('<sfile>:h:h').'/fzf'
+let s:fzf_tmux = expand('<sfile>:h:h').'/bin/fzf-tmux'
 
 let s:cpo_save = &cpo
 set cpo&vim
 
 function! s:fzf_exec()
   if !exists('s:exec')
+    if executable(s:fzf_go)
+      let s:exec = s:fzf_go
+    else
+      let path = split(system('which fzf 2> /dev/null'), '\n')
+      if !v:shell_error && !empty(path)
+        let s:exec = path[0]
+      elseif executable(s:fzf_rb)
+        let s:exec = s:fzf_rb
+      else
         call system('type fzf')
         if v:shell_error
-      let s:exec = executable(s:fzf_go) ?
+          throw 'fzf executable not found'
-            \ s:fzf_go : (executable(s:fzf_rb) ? s:fzf_rb : '')
         else
           let s:exec = 'fzf'
         endif
-    return s:fzf_exec()
+      endif
-  elseif empty(s:exec)
+    endif
-    unlet s:exec
+    return s:exec
-    throw 'fzf executable not found'
   else
     return s:exec
   endif
@@ -59,7 +65,7 @@ function! s:tmux_enabled()
   endif
 
   let s:tmux = 0
-  if exists('$TMUX')
+  if exists('$TMUX') && executable(s:fzf_tmux)
     let output = system('tmux -V')
     let s:tmux = !v:shell_error && output >= 'tmux 1.7'
   endif
@@ -74,8 +80,23 @@ function! s:escape(path)
   return substitute(a:path, ' ', '\\ ', 'g')
 endfunction
 
+" Upgrade legacy options
+function! s:upgrade(dict)
+  let copy = copy(a:dict)
+  if has_key(copy, 'tmux')
+    let copy.down = remove(copy, 'tmux')
+  endif
+  if has_key(copy, 'tmux_height')
+    let copy.down = remove(copy, 'tmux_height')
+  endif
+  if has_key(copy, 'tmux_width')
+    let copy.right = remove(copy, 'tmux_width')
+  endif
+  return copy
+endfunction
+
 function! fzf#run(...) abort
-  let dict   = exists('a:1') ? a:1 : {}
+  let dict   = exists('a:1') ? s:upgrade(a:1) : {}
   let temps  = { 'result': tempname() }
   let optstr = get(dict, 'options', '')
   try
@@ -99,26 +120,47 @@ function! fzf#run(...) abort
   else
     let prefix = ''
   endif
-  let command = prefix.fzf_exec.' '.optstr.' > '.temps.result
+  let split = s:tmux_enabled() && s:tmux_splittable(dict)
+  let command = prefix.(split ? s:fzf_tmux(dict) : fzf_exec).' '.optstr.' > '.temps.result
 
-  if s:tmux_enabled() && s:tmux_splittable(dict)
+  if split
     return s:execute_tmux(dict, command, temps)
   else
     return s:execute(dict, command, temps)
   endif
 endfunction
 
+function! s:present(dict, ...)
+  for key in a:000
+    if !empty(get(a:dict, key, ''))
+      return 1
+    endif
+  endfor
+  return 0
+endfunction
+
+function! s:fzf_tmux(dict)
+  let size = ''
+  for o in ['up', 'down', 'left', 'right']
+    if s:present(a:dict, o)
+      let size = '-'.o[0].(a:dict[o] == 1 ? '' : a:dict[o])
+    endif
+  endfor
+  return printf('LINES=%d COLUMNS=%d %s %s %s --',
+    \ &lines, &columns, s:fzf_tmux, size, (has_key(a:dict, 'source') ? '' : '-'))
+endfunction
+
 function! s:tmux_splittable(dict)
-  return
+  return s:present(a:dict, 'up', 'down', 'left', 'right')
-  \ min([&columns, get(a:dict, 'tmux_width', 0)]) >= s:min_tmux_width ||
-  \ min([&lines, get(a:dict, 'tmux_height', get(a:dict, 'tmux', 0))]) >= s:min_tmux_height
 endfunction
 
 function! s:pushd(dict)
-  if !empty(get(a:dict, 'dir', ''))
+  if s:present(a:dict, 'dir')
     let a:dict.prev_dir = getcwd()
     execute 'chdir '.s:escape(a:dict.dir)
+    return 1
   endif
+  return 0
 endfunction
 
 function! s:popd(dict)
@@ -146,7 +188,7 @@ function! s:execute(dict, command, temps)
     endif
     return []
   else
-    return s:callback(a:dict, a:temps, 0)
+    return s:callback(a:dict, a:temps)
   endif
 endfunction
 
@@ -159,58 +201,20 @@ function! s:env_var(name)
 endfunction
 
 function! s:execute_tmux(dict, command, temps)
-  let command = s:env_var('FZF_DEFAULT_OPTS').s:env_var('FZF_DEFAULT_COMMAND').a:command
+  let command = a:command
-  if !empty(get(a:dict, 'dir', ''))
+  if s:pushd(a:dict)
+    " -c '#{pane_current_path}' is only available on tmux 1.9 or above
     let command = 'cd '.s:escape(a:dict.dir).' && '.command
   endif
 
-  let splitopt = '-v'
+  call system(command)
-  if has_key(a:dict, 'tmux_width')
+  return s:callback(a:dict, a:temps)
-    let splitopt = '-h'
-    let size = a:dict.tmux_width
-  else
-    let size = get(a:dict, 'tmux_height', get(a:dict, 'tmux'))
-  endif
-
-  if type(size) == 1 && size =~ '%$'
-    let sizeopt = '-p '.size[0:-2]
-  else
-    let sizeopt = '-l '.size
-  endif
-
-  let s:pane = substitute(
-    \ system(
-      \ printf(
-        \ 'tmux split-window %s %s -P -F "#{pane_id}" %s',
-        \ splitopt, sizeopt, s:shellesc(command))), '\n', '', 'g')
-  let s:dict = a:dict
-  let s:temps = a:temps
-
-  augroup fzf_tmux
-    autocmd!
-    autocmd VimResized * nested call s:tmux_check()
-  augroup END
 endfunction
 
-function! s:tmux_check()
+function! s:callback(dict, temps)
-  let panes = split(system('tmux list-panes -a -F "#{pane_id}"'), '\n')
-
-  if index(panes, s:pane) < 0
-    augroup fzf_tmux
-      autocmd!
-    augroup END
-
-    call s:callback(s:dict, s:temps, 1)
-    redraw
-  endif
-endfunction
-
-function! s:callback(dict, temps, cd)
   if !filereadable(a:temps.result)
     let lines = []
   else
-    if a:cd | call s:pushd(a:dict) | endif
-
     let lines = readfile(a:temps.result)
     if has_key(a:dict, 'sink')
       for line in lines
@@ -239,7 +243,7 @@ function! s:cmd(bang, ...) abort
     let opts.dir = remove(args, -1)
   endif
   if !a:bang
-    let opts.tmux = get(g:, 'fzf_tmux_height', s:default_tmux_height)
+    let opts.down = get(g:, 'fzf_tmux_height', s:default_tmux_height)
   endif
   call fzf#run(extend({ 'sink': 'e', 'options': join(args) }, opts))
 endfunction

src/Dockerfile.arch

@@ -6,7 +6,7 @@ RUN pacman-db-upgrade && pacman -Syu --noconfirm base-devel git
 
 # Install Go 1.4
 RUN cd / && curl \
-    https://storage.googleapis.com/golang/go1.4.1.linux-amd64.tar.gz | \
+    https://storage.googleapis.com/golang/go1.4.2.linux-amd64.tar.gz | \
     tar -xz && mv go go1.4
 
 ENV GOPATH /go

src/Dockerfile.centos

@@ -6,7 +6,7 @@ RUN yum install -y git gcc make tar ncurses-devel
 
 # Install Go 1.4
 RUN cd / && curl \
-    https://storage.googleapis.com/golang/go1.4.1.linux-amd64.tar.gz | \
+    https://storage.googleapis.com/golang/go1.4.2.linux-amd64.tar.gz | \
     tar -xz && mv go go1.4
 
 ENV GOPATH /go

src/Dockerfile.ubuntu

@@ -7,7 +7,7 @@ RUN apt-get update && apt-get -y upgrade && \
 
 # Install Go 1.4
 RUN cd / && curl \
-    https://storage.googleapis.com/golang/go1.4.1.linux-amd64.tar.gz | \
+    https://storage.googleapis.com/golang/go1.4.2.linux-amd64.tar.gz | \
     tar -xz && mv go go1.4
 
 ENV GOPATH /go

src/constants.go

@@ -5,7 +5,7 @@ import (
 )
 
 // Current version
-const Version = "0.9.3"
+const Version = "0.9.4"
 
 // fzf events
 const (

src/core.go

@@ -85,20 +85,37 @@ func Run(options *Options) {
 	}
 
 	// Reader
+	streamingFilter := opts.Filter != nil && opts.Sort == 0 && !opts.Tac && !opts.Sync
+	if !streamingFilter {
 		reader := Reader{func(str string) { chunkList.Push(str) }, eventBox}
 		go reader.ReadSource()
+	}
 
 	// Matcher
 	patternBuilder := func(runes []rune) *Pattern {
 		return BuildPattern(
 			opts.Mode, opts.Case, opts.Nth, opts.Delimiter, runes)
 	}
-	matcher := NewMatcher(patternBuilder, opts.Sort > 0, eventBox)
+	matcher := NewMatcher(patternBuilder, opts.Sort > 0, opts.Tac, eventBox)
 
 	// Filtering mode
 	if opts.Filter != nil {
+		if opts.PrintQuery {
+			fmt.Println(*opts.Filter)
+		}
+
 		pattern := patternBuilder([]rune(*opts.Filter))
 
+		if streamingFilter {
+			reader := Reader{
+				func(str string) {
+					item := chunkList.trans(&str, 0)
+					if pattern.MatchItem(item) {
+						fmt.Println(*item.text)
+					}
+				}, eventBox}
+			reader.ReadSource()
+		} else {
 			eventBox.Unwatch(EvtReadNew)
 			eventBox.WaitFor(EvtReadFin)
 
@@ -106,13 +123,10 @@ func Run(options *Options) {
 			merger, _ := matcher.scan(MatchRequest{
 				chunks:  snapshot,
 				pattern: pattern})
-
-		if opts.PrintQuery {
-			fmt.Println(*opts.Filter)
-		}
 			for i := 0; i < merger.Length(); i++ {
 				fmt.Println(merger.Get(i).AsString())
 			}
+		}
 		os.Exit(0)
 	}
 

src/item.go

@@ -87,10 +87,28 @@ func (a ByRelevance) Less(i, j int) bool {
 	irank := a[i].Rank(true)
 	jrank := a[j].Rank(true)
 
-	return compareRanks(irank, jrank)
+	return compareRanks(irank, jrank, false)
 }
 
-func compareRanks(irank Rank, jrank Rank) bool {
+// ByRelevanceTac is for sorting Items
+type ByRelevanceTac []*Item
+
+func (a ByRelevanceTac) Len() int {
+	return len(a)
+}
+
+func (a ByRelevanceTac) Swap(i, j int) {
+	a[i], a[j] = a[j], a[i]
+}
+
+func (a ByRelevanceTac) Less(i, j int) bool {
+	irank := a[i].Rank(true)
+	jrank := a[j].Rank(true)
+
+	return compareRanks(irank, jrank, true)
+}
+
+func compareRanks(irank Rank, jrank Rank, tac bool) bool {
 	if irank.matchlen < jrank.matchlen {
 		return true
 	} else if irank.matchlen > jrank.matchlen {
@@ -103,8 +121,5 @@ func compareRanks(irank Rank, jrank Rank) bool {
 		return false
 	}
 
-	if irank.index <= jrank.index {
+	return (irank.index <= jrank.index) != tac
-		return true
-	}
-	return false
 }

src/item_test.go

@@ -20,12 +20,19 @@ func TestOffsetSort(t *testing.T) {
 }
 
 func TestRankComparison(t *testing.T) {
-	if compareRanks(Rank{3, 0, 5}, Rank{2, 0, 7}) ||
+	if compareRanks(Rank{3, 0, 5}, Rank{2, 0, 7}, false) ||
-		!compareRanks(Rank{3, 0, 5}, Rank{3, 0, 6}) ||
+		!compareRanks(Rank{3, 0, 5}, Rank{3, 0, 6}, false) ||
-		!compareRanks(Rank{1, 2, 3}, Rank{1, 3, 2}) ||
+		!compareRanks(Rank{1, 2, 3}, Rank{1, 3, 2}, false) ||
-		!compareRanks(Rank{0, 0, 0}, Rank{0, 0, 0}) {
+		!compareRanks(Rank{0, 0, 0}, Rank{0, 0, 0}, false) {
 		t.Error("Invalid order")
 	}
+
+	if compareRanks(Rank{3, 0, 5}, Rank{2, 0, 7}, true) ||
+		!compareRanks(Rank{3, 0, 5}, Rank{3, 0, 6}, false) ||
+		!compareRanks(Rank{1, 2, 3}, Rank{1, 3, 2}, true) ||
+		!compareRanks(Rank{0, 0, 0}, Rank{0, 0, 0}, false) {
+		t.Error("Invalid order (tac)")
+	}
 }
 
 // Match length, string length, index

src/matcher.go

@@ -21,6 +21,7 @@ type MatchRequest struct {
 type Matcher struct {
 	patternBuilder func([]rune) *Pattern
 	sort           bool
+	tac            bool
 	eventBox       *util.EventBox
 	reqBox         *util.EventBox
 	partitions     int
@@ -38,10 +39,11 @@ const (
 
 // NewMatcher returns a new Matcher
 func NewMatcher(patternBuilder func([]rune) *Pattern,
-	sort bool, eventBox *util.EventBox) *Matcher {
+	sort bool, tac bool, eventBox *util.EventBox) *Matcher {
 	return &Matcher{
 		patternBuilder: patternBuilder,
 		sort:           sort,
+		tac:            tac,
 		eventBox:       eventBox,
 		reqBox:         util.NewEventBox(),
 		partitions:     runtime.NumCPU(),
@@ -159,8 +161,12 @@ func (m *Matcher) scan(request MatchRequest) (*Merger, bool) {
 				countChan <- len(matches)
 			}
 			if !empty && m.sort {
+				if m.tac {
+					sort.Sort(ByRelevanceTac(sliceMatches))
+				} else {
 					sort.Sort(ByRelevance(sliceMatches))
 				}
+			}
 			resultChan <- partialResult{idx, sliceMatches}
 		}(idx, chunks)
 	}
@@ -195,7 +201,7 @@ func (m *Matcher) scan(request MatchRequest) (*Merger, bool) {
 		partialResult := <-resultChan
 		partialResults[partialResult.index] = partialResult.matches
 	}
-	return NewMerger(partialResults, !empty && m.sort), false
+	return NewMerger(partialResults, !empty && m.sort, m.tac), false
 }
 
 // Reset is called to interrupt/signal the ongoing search

src/merger.go

@@ -3,7 +3,7 @@ package fzf
 import "fmt"
 
 // Merger with no data
-var EmptyMerger = NewMerger([][]*Item{}, false)
+var EmptyMerger = NewMerger([][]*Item{}, false, false)
 
 // Merger holds a set of locally sorted lists of items and provides the view of
 // a single, globally-sorted list
@@ -12,17 +12,19 @@ type Merger struct {
 	merged  []*Item
 	cursors []int
 	sorted  bool
+	tac     bool
 	final   bool
 	count   int
 }
 
 // NewMerger returns a new Merger
-func NewMerger(lists [][]*Item, sorted bool) *Merger {
+func NewMerger(lists [][]*Item, sorted bool, tac bool) *Merger {
 	mg := Merger{
 		lists:   lists,
 		merged:  []*Item{},
 		cursors: make([]int, len(lists)),
 		sorted:  sorted,
+		tac:     tac,
 		final:   false,
 		count:   0}
 
@@ -39,9 +41,13 @@ func (mg *Merger) Length() int {
 
 // Get returns the pointer to the Item object indexed by the given integer
 func (mg *Merger) Get(idx int) *Item {
-	if len(mg.lists) == 1 {
+	if mg.sorted {
-		return mg.lists[0][idx]
+		return mg.mergedGet(idx)
-	} else if !mg.sorted {
+	}
+
+	if mg.tac {
+		idx = mg.Length() - idx - 1
+	}
 	for _, list := range mg.lists {
 		numItems := len(list)
 		if idx < numItems {
@@ -50,8 +56,6 @@ func (mg *Merger) Get(idx int) *Item {
 		idx -= numItems
 	}
 	panic(fmt.Sprintf("Index out of bounds (unsorted, %d/%d)", idx, mg.count))
-	}
-	return mg.mergedGet(idx)
 }
 
 func (mg *Merger) mergedGet(idx int) *Item {
@@ -66,7 +70,7 @@ func (mg *Merger) mergedGet(idx int) *Item {
 			}
 			if cursor >= 0 {
 				rank := list[cursor].Rank(false)
-				if minIdx < 0 || compareRanks(rank, minRank) {
+				if minIdx < 0 || compareRanks(rank, minRank, mg.tac) {
 					minRank = rank
 					minIdx = listIdx
 				}

src/merger_test.go

@@ -62,7 +62,7 @@ func TestMergerUnsorted(t *testing.T) {
 	cnt := len(items)
 
 	// Not sorted: same order
-	mg := NewMerger(lists, false)
+	mg := NewMerger(lists, false, false)
 	assert(t, cnt == mg.Length(), "Invalid Length")
 	for i := 0; i < cnt; i++ {
 		assert(t, items[i] == mg.Get(i), "Invalid Get")
@@ -74,7 +74,7 @@ func TestMergerSorted(t *testing.T) {
 	cnt := len(items)
 
 	// Sorted sorted order
-	mg := NewMerger(lists, true)
+	mg := NewMerger(lists, true, false)
 	assert(t, cnt == mg.Length(), "Invalid Length")
 	sort.Sort(ByRelevance(items))
 	for i := 0; i < cnt; i++ {
@@ -84,7 +84,7 @@ func TestMergerSorted(t *testing.T) {
 	}
 
 	// Inverse order
-	mg2 := NewMerger(lists, true)
+	mg2 := NewMerger(lists, true, false)
 	for i := cnt - 1; i >= 0; i-- {
 		if items[i] != mg2.Get(i) {
 			t.Error("Not sorted", items[i], mg2.Get(i))

src/options.go

@@ -11,7 +11,7 @@ import (
 
 const usage = `usage: fzf [options]
 
-  Search
+  Search mode
     -x, --extended        Extended-search mode
     -e, --extended-exact  Extended-search mode (exact match)
     -i                    Case-insensitive match (default: smart-case match)
@@ -23,8 +23,9 @@ const usage = `usage: fzf [options]
     -d, --delimiter=STR   Field delimiter regex for --nth (default: AWK-style)
 
   Search result
-    -s, --sort            Sort the result
+    +s, --no-sort         Do not sort the result
-    +s, --no-sort         Do not sort the result. Keep the sequence unchanged.
+        --tac             Reverse the order of the input
+                          (e.g. 'history | fzf --tac --no-sort')
 
   Interface
     -m, --multi           Enable multi-select with tab/shift-tab
@@ -78,6 +79,7 @@ type Options struct {
 	WithNth    []Range
 	Delimiter  *regexp.Regexp
 	Sort       int
+	Tac        bool
 	Multi      bool
 	Mouse      bool
 	Color      bool
@@ -102,6 +104,7 @@ func defaultOptions() *Options {
 		WithNth:    make([]Range, 0),
 		Delimiter:  nil,
 		Sort:       1000,
+		Tac:        false,
 		Multi:      false,
 		Mouse:      true,
 		Color:      true,
@@ -212,6 +215,10 @@ func parseOptions(opts *Options, allArgs []string) {
 			opts.Sort = optionalNumeric(allArgs, &i)
 		case "+s", "--no-sort":
 			opts.Sort = 0
+		case "--tac":
+			opts.Tac = true
+		case "--no-tac":
+			opts.Tac = false
 		case "-i":
 			opts.Case = CaseIgnore
 		case "+i":

src/pattern.go

@@ -219,12 +219,7 @@ Loop:
 		}
 	}
 
-	var matches []*Item
+	matches := p.matchChunk(space)
-	if p.mode == ModeFuzzy {
-		matches = p.fuzzyMatch(space)
-	} else {
-		matches = p.extendedMatch(space)
-	}
 
 	if !p.hasInvTerm {
 		_cache.Add(chunk, cacheKey, matches)
@@ -232,6 +227,35 @@ Loop:
 	return matches
 }
 
+func (p *Pattern) matchChunk(chunk *Chunk) []*Item {
+	matches := []*Item{}
+	if p.mode == ModeFuzzy {
+		for _, item := range *chunk {
+			if sidx, eidx := p.fuzzyMatch(item); sidx >= 0 {
+				matches = append(matches,
+					dupItem(item, []Offset{Offset{int32(sidx), int32(eidx)}}))
+			}
+		}
+	} else {
+		for _, item := range *chunk {
+			if offsets := p.extendedMatch(item); len(offsets) == len(p.terms) {
+				matches = append(matches, dupItem(item, offsets))
+			}
+		}
+	}
+	return matches
+}
+
+// MatchItem returns true if the Item is a match
+func (p *Pattern) MatchItem(item *Item) bool {
+	if p.mode == ModeFuzzy {
+		sidx, _ := p.fuzzyMatch(item)
+		return sidx >= 0
+	}
+	offsets := p.extendedMatch(item)
+	return len(offsets) == len(p.terms)
+}
+
 func dupItem(item *Item, offsets []Offset) *Item {
 	sort.Sort(ByOrder(offsets))
 	return &Item{
@@ -243,21 +267,12 @@ func dupItem(item *Item, offsets []Offset) *Item {
 		rank:        Rank{0, 0, item.index}}
 }
 
-func (p *Pattern) fuzzyMatch(chunk *Chunk) []*Item {
+func (p *Pattern) fuzzyMatch(item *Item) (int, int) {
-	matches := []*Item{}
-	for _, item := range *chunk {
 	input := p.prepareInput(item)
-		if sidx, eidx := p.iter(algo.FuzzyMatch, input, p.text); sidx >= 0 {
+	return p.iter(algo.FuzzyMatch, input, p.text)
-			matches = append(matches,
-				dupItem(item, []Offset{Offset{int32(sidx), int32(eidx)}}))
-		}
-	}
-	return matches
 }
 
-func (p *Pattern) extendedMatch(chunk *Chunk) []*Item {
+func (p *Pattern) extendedMatch(item *Item) []Offset {
-	matches := []*Item{}
-	for _, item := range *chunk {
 	input := p.prepareInput(item)
 	offsets := []Offset{}
 	for _, term := range p.terms {
@@ -271,11 +286,7 @@ func (p *Pattern) extendedMatch(chunk *Chunk) []*Item {
 			offsets = append(offsets, Offset{0, 0})
 		}
 	}
-		if len(offsets) == len(p.terms) {
+	return offsets
-			matches = append(matches, dupItem(item, offsets))
-		}
-	}
-	return matches
 }
 
 func (p *Pattern) prepareInput(item *Item) *Transformed {

src/pattern_test.go

@@ -98,14 +98,15 @@ func TestOrigTextAndTransformed(t *testing.T) {
 	tokens := Tokenize(strptr("junegunn"), nil)
 	trans := Transform(tokens, []Range{Range{1, 1}})
 
-	for _, fun := range []func(*Chunk) []*Item{pattern.fuzzyMatch, pattern.extendedMatch} {
+	for _, mode := range []Mode{ModeFuzzy, ModeExtended} {
 		chunk := Chunk{
 			&Item{
 				text:        strptr("junegunn"),
 				origText:    strptr("junegunn.choi"),
 				transformed: trans},
 		}
-		matches := fun(&chunk)
+		pattern.mode = mode
+		matches := pattern.matchChunk(&chunk)
 		if *matches[0].text != "junegunn" || *matches[0].origText != "junegunn.choi" ||
 			matches[0].offsets[0][0] != 0 || matches[0].offsets[0][1] != 5 ||
 			matches[0].transformed != trans {

src/terminal.go

@@ -22,7 +22,6 @@ import (
 type Terminal struct {
 	prompt     string
 	reverse    bool
-	tac        bool
 	cx         int
 	cy         int
 	offset     int
@@ -85,7 +84,6 @@ func NewTerminal(opts *Options, eventBox *util.EventBox) *Terminal {
 	input := []rune(opts.Query)
 	return &Terminal{
 		prompt:     opts.Prompt,
-		tac:        opts.Sort == 0,
 		reverse:    opts.Reverse,
 		cx:         len(input),
 		cy:         0,
@@ -148,13 +146,6 @@ func (t *Terminal) UpdateList(merger *Merger) {
 	t.reqBox.Set(reqList, nil)
 }
 
-func (t *Terminal) listIndex(y int) int {
-	if t.tac {
-		return t.merger.Length() - y - 1
-	}
-	return y
-}
-
 func (t *Terminal) output() {
 	if t.printQuery {
 		fmt.Println(string(t.input))
@@ -162,7 +153,7 @@ func (t *Terminal) output() {
 	if len(t.selected) == 0 {
 		cnt := t.merger.Length()
 		if cnt > 0 && cnt > t.cy {
-			fmt.Println(t.merger.Get(t.listIndex(t.cy)).AsString())
+			fmt.Println(t.merger.Get(t.cy).AsString())
 		}
 	} else {
 		sels := make([]selectedItem, 0, len(t.selected))
@@ -246,7 +237,7 @@ func (t *Terminal) printList() {
 	for i := 0; i < maxy; i++ {
 		t.move(i+2, 0, true)
 		if i < count {
-			t.printItem(t.merger.Get(t.listIndex(i+t.offset)), i == t.cy-t.offset)
+			t.printItem(t.merger.Get(i+t.offset), i == t.cy-t.offset)
 		}
 	}
 }
@@ -525,9 +516,8 @@ func (t *Terminal) Loop() {
 			}
 		}
 		toggle := func() {
-			idx := t.listIndex(t.cy)
+			if t.cy < t.merger.Length() {
-			if idx < t.merger.Length() {
+				item := t.merger.Get(t.cy)
-				item := t.merger.Get(idx)
 				if _, found := t.selected[item.text]; !found {
 					var strptr *string
 					if item.origText != nil {
@@ -650,7 +640,7 @@ func (t *Terminal) Loop() {
 			} else if me.Double {
 				// Double-click
 				if my >= 2 {
-					if t.vset(my-2) && t.listIndex(t.cy) < t.merger.Length() {
+					if t.vset(my-2) && t.cy < t.merger.Length() {
 						req(reqClose)
 					}
 				}

test/test_go.rb

@@ -2,11 +2,20 @@
 # encoding: utf-8
 
 require 'minitest/autorun'
+require 'fileutils'
 
 class NilClass
   def include? str
     false
   end
+
+  def start_with? str
+    false
+  end
+
+  def end_with? str
+    false
+  end
 end
 
 module Temp
@@ -15,7 +24,7 @@ module Temp
     waited = 0
     while waited < 5
       begin
-        data = File.read(name)
+        data = `cat #{name}`
         return data unless data.empty?
       rescue
         sleep 0.1
@@ -30,6 +39,20 @@ module Temp
   end
 end
 
+class Shell
+  class << self
+    def bash
+      'PS1= PROMPT_COMMAND= bash --rcfile ~/.fzf.bash'
+    end
+
+    def zsh
+      FileUtils.mkdir_p '/tmp/fzf-zsh'
+      FileUtils.cp File.expand_path('~/.fzf.zsh'), '/tmp/fzf-zsh/.zshrc'
+      'PS1= PROMPT_COMMAND= HISTSIZE=100 ZDOTDIR=/tmp/fzf-zsh zsh'
+    end
+  end
+end
+
 class Tmux
   include Temp
 
@@ -37,18 +60,33 @@ class Tmux
 
   attr_reader :win
 
-  def initialize shell = 'bash'
+  def initialize shell = :bash
-    @win = go("new-window -d -P -F '#I' 'PS1= PROMPT_COMMAND= bash --rcfile ~/.fzf.#{shell}'").first
+    @win =
+      case shell
+      when :bash
+        go("new-window -d -P -F '#I' '#{Shell.bash}'").first
+      when :zsh
+        go("new-window -d -P -F '#I' '#{Shell.zsh}'").first
+      when :fish
+        go("new-window -d -P -F '#I' 'fish'").first
+      else
+        raise "Unknown shell: #{shell}"
+      end
     @lines = `tput lines`.chomp.to_i
+
+    if shell == :fish
+      send_keys('function fish_prompt; end; clear', :Enter)
+      self.until { |lines| lines.empty? }
+    end
   end
 
   def closed?
     !go("list-window -F '#I'").include?(win)
   end
 
-  def close timeout = 1
+  def close
     send_keys 'C-c', 'C-u', 'exit', :Enter
-    wait(timeout) { closed? }
+    wait { closed? }
   end
 
   def kill
@@ -56,35 +94,68 @@ class Tmux
   end
 
   def send_keys *args
+    target =
+      if args.last.is_a?(Hash)
+        hash = args.pop
+        go("select-window -t #{win}")
+        "#{win}.#{hash[:pane]}"
+      else
+        win
+      end
     args = args.map { |a| %{"#{a}"} }.join ' '
-    go("send-keys -t #{win} #{args}")
+    go("send-keys -t #{target} #{args}")
   end
 
-  def capture
+  def capture opts = {}
-    go("capture-pane -t #{win} \\; save-buffer #{TEMPNAME}")
+    timeout, pane = defaults(opts).values_at(:timeout, :pane)
-    raise "Window not found" if $?.exitstatus != 0
+    waited = 0
+    loop do
+      go("capture-pane -t #{win}.#{pane} \\; save-buffer #{TEMPNAME}")
+      break if $?.exitstatus == 0
+
+      if waited > timeout
+        raise "Window not found"
+      end
+      waited += 0.1
+      sleep 0.1
+    end
     readonce.split($/)[0, @lines].reverse.drop_while(&:empty?).reverse
   end
 
-  def until timeout = 1
+  def until opts = {}
-    wait(timeout) { yield capture }
+    lines = nil
+    wait(opts) do
+      yield lines = capture(opts)
+    end
+    lines
   end
 
+  def prepare
+    self.send_keys 'echo hello', :Enter
+    self.until { |lines| lines[-1].start_with?('hello') }
+    self.send_keys 'clear', :Enter
+    self.until { |lines| lines.empty? }
+  end
 private
-  def wait timeout = 1
+  def defaults opts
+    { timeout: 10, pane: 0 }.merge(opts)
+  end
+
+  def wait opts = {}
+    timeout, pane = defaults(opts).values_at(:timeout, :pane)
     waited = 0
     until yield
-      waited += 0.1
-      sleep 0.1
       if waited > timeout
         hl = '=' * 10
         puts hl
-        capture.each_with_index do |line, idx|
+        capture(opts).each_with_index do |line, idx|
           puts [idx.to_s.rjust(2), line].join(': ')
         end
         puts hl
         raise "timeout"
       end
+      waited += 0.1
+      sleep 0.1
     end
   end
 
@@ -93,7 +164,7 @@ private
   end
 end
 
-class TestGoFZF < MiniTest::Unit::TestCase
+class TestBase < Minitest::Test
   include Temp
 
   FIN = 'FIN'
@@ -104,11 +175,6 @@ class TestGoFZF < MiniTest::Unit::TestCase
   def setup
     ENV.delete 'FZF_DEFAULT_OPTS'
     ENV.delete 'FZF_DEFAULT_COMMAND'
-    @tmux = Tmux.new
-  end
-
-  def teardown
-    @tmux.kill
   end
 
   def fzf(*opts)
@@ -129,10 +195,22 @@ class TestGoFZF < MiniTest::Unit::TestCase
     }.compact
     "fzf #{opts.join ' '}"
   end
+end
+
+class TestGoFZF < TestBase
+  def setup
+    super
+    @tmux = Tmux.new
+  end
+
+  def teardown
+    @tmux.kill
+  end
 
   def test_vanilla
     tmux.send_keys "seq 1 100000 | #{fzf}", :Enter
-    tmux.until(10) { |lines| lines.last =~ /^>/ && lines[-2] =~ /^  100000/ }
+    tmux.until(timeout: 20) { |lines|
+      lines.last =~ /^>/ && lines[-2] =~ /^  100000/ }
     lines = tmux.capture
     assert_equal '  2',             lines[-4]
     assert_equal '> 1',             lines[-3]
@@ -322,5 +400,178 @@ class TestGoFZF < MiniTest::Unit::TestCase
     tmux.send_keys 'C-K', :Enter
     assert_equal ['1919'], readonce.split($/)
   end
+
+  def test_tac
+    tmux.send_keys "seq 1 1000 | #{fzf :tac, :multi}", :Enter
+    tmux.until { |lines| lines[-2].include? '1000/1000' }
+    tmux.send_keys :BTab, :BTab, :BTab, :Enter
+    assert_equal %w[1000 999 998], readonce.split($/)
+  end
+
+  def test_tac_sort
+    tmux.send_keys "seq 1 1000 | #{fzf :tac, :multi}", :Enter
+    tmux.until { |lines| lines[-2].include? '1000/1000' }
+    tmux.send_keys '99'
+    tmux.send_keys :BTab, :BTab, :BTab, :Enter
+    assert_equal %w[99 999 998], readonce.split($/)
+  end
+
+  def test_tac_nosort
+    tmux.send_keys "seq 1 1000 | #{fzf :tac, :no_sort, :multi}", :Enter
+    tmux.until { |lines| lines[-2].include? '1000/1000' }
+    tmux.send_keys '00'
+    tmux.send_keys :BTab, :BTab, :BTab, :Enter
+    assert_equal %w[1000 900 800], readonce.split($/)
+  end
+end
+
+module TestShell
+  def setup
+    super
+  end
+
+  def teardown
+    @tmux.kill
+  end
+
+  def test_ctrl_t
+    tmux.prepare
+    tmux.send_keys 'C-t', pane: 0
+    lines = tmux.until(pane: 1) { |lines| lines[-1].start_with? '>' }
+    expected = lines.values_at(-3, -4).map { |line| line[2..-1] }.join(' ')
+    tmux.send_keys :BTab, :BTab, :Enter, pane: 1
+    tmux.until(pane: 0) { |lines| lines[-1].include? expected }
+    tmux.send_keys 'C-c'
+
+    # FZF_TMUX=0
+    new_shell
+    tmux.send_keys 'C-t', pane: 0
+    lines = tmux.until(pane: 0) { |lines| lines[-1].start_with? '>' }
+    expected = lines.values_at(-3, -4).map { |line| line[2..-1] }.join(' ')
+    tmux.send_keys :BTab, :BTab, :Enter, pane: 0
+    tmux.until(pane: 0) { |lines| lines[-1].include? expected }
+    tmux.send_keys 'C-c', 'C-d'
+  end
+
+  def test_alt_c
+    tmux.prepare
+    tmux.send_keys :Escape, :c
+    lines = tmux.until { |lines| lines[-1].start_with? '>' }
+    expected = lines[-3][2..-1]
+    p expected
+    tmux.send_keys :Enter
+    tmux.prepare
+    tmux.send_keys :pwd, :Enter
+    tmux.until { |lines| p lines; lines[-1].end_with?(expected) }
+  end
+
+  def test_ctrl_r
+    tmux.prepare
+    tmux.send_keys 'echo 1st', :Enter; tmux.prepare
+    tmux.send_keys 'echo 2nd', :Enter; tmux.prepare
+    tmux.send_keys 'echo 3d',  :Enter; tmux.prepare
+    tmux.send_keys 'echo 3rd', :Enter; tmux.prepare
+    tmux.send_keys 'echo 4th', :Enter; tmux.prepare
+    tmux.send_keys 'C-r'
+    tmux.until { |lines| lines[-1].start_with? '>' }
+    tmux.send_keys '3d'
+    tmux.until { |lines| lines[-3].end_with? 'echo 3rd' } # --no-sort
+    tmux.send_keys :Enter
+    tmux.until { |lines| lines[-1] == 'echo 3rd' }
+    tmux.send_keys :Enter
+    tmux.until { |lines| lines[-1] == '3rd' }
+  end
+end
+
+class TestBash < TestBase
+  include TestShell
+
+  def new_shell
+    tmux.send_keys "FZF_TMUX=0 #{Shell.bash}", :Enter
+    tmux.prepare
+  end
+
+  def setup
+    super
+    @tmux = Tmux.new :bash
+  end
+
+  def test_file_completion
+    tmux.send_keys 'mkdir -p /tmp/fzf-test; touch /tmp/fzf-test/{1..100}', :Enter
+    tmux.prepare
+    tmux.send_keys 'cat /tmp/fzf-test/10**', :Tab
+    tmux.until { |lines| lines[-1].start_with? '>' }
+    tmux.send_keys :BTab, :BTab, :Enter
+    tmux.until { |lines|
+      lines[-1].include?('/tmp/fzf-test/10') &&
+      lines[-1].include?('/tmp/fzf-test/100')
+    }
+  end
+
+  def test_dir_completion
+    tmux.send_keys 'mkdir -p /tmp/fzf-test/d{1..100}; touch /tmp/fzf-test/d55/xxx', :Enter
+    tmux.prepare
+    tmux.send_keys 'cd /tmp/fzf-test/**', :Tab
+    tmux.until { |lines| lines[-1].start_with? '>' }
+    tmux.send_keys :BTab, :BTab # BTab does not work here
+    tmux.send_keys 55
+    tmux.until { |lines| lines[-2].start_with? '  1/' }
+    tmux.send_keys :Enter
+    tmux.until { |lines| lines[-1] == 'cd /tmp/fzf-test/d55/' }
+    tmux.send_keys :xx
+    tmux.until { |lines| lines[-1] == 'cd /tmp/fzf-test/d55/xx' }
+
+    # Should not match regular files
+    tmux.send_keys :Tab
+    tmux.until { |lines| lines[-1] == 'cd /tmp/fzf-test/d55/xx' }
+
+    # Fail back to plusdirs
+    tmux.send_keys :BSpace, :BSpace, :BSpace
+    tmux.until { |lines| lines[-1] == 'cd /tmp/fzf-test/d55' }
+    tmux.send_keys :Tab
+    tmux.until { |lines| lines[-1] == 'cd /tmp/fzf-test/d55/' }
+  end
+
+  def test_process_completion
+    tmux.send_keys 'sleep 12345 &', :Enter
+    lines = tmux.until { |lines| lines[-1].start_with? '[1]' }
+    pid = lines[-1].split.last
+    tmux.prepare
+    tmux.send_keys 'kill ', :Tab
+    tmux.until { |lines| lines[-1].start_with? '>' }
+    tmux.send_keys 'sleep12345'
+    tmux.until { |lines| lines[-3].include? 'sleep 12345' }
+    tmux.send_keys :Enter
+    tmux.until { |lines| lines[-1] == "kill #{pid}" }
+  end
+end
+
+class TestZsh < TestBase
+  include TestShell
+
+  def new_shell
+    tmux.send_keys "FZF_TMUX=0 #{Shell.zsh}", :Enter
+    tmux.prepare
+  end
+
+  def setup
+    super
+    @tmux = Tmux.new :zsh
+  end
+end
+
+class TestFish < TestBase
+  include TestShell
+
+  def new_shell
+    tmux.send_keys 'env FZF_TMUX=0 fish', :Enter
+    tmux.send_keys 'function fish_prompt; end; clear', :Enter
+    tmux.until { |lines| lines.empty? }
+  end
+
+  def setup
+    super
+    @tmux = Tmux.new :fish
+  end
 end
 

test/test_ruby.rb

@@ -54,7 +54,7 @@ class MockTTY
   end
 end
 
-class TestRubyFZF < MiniTest::Unit::TestCase
+class TestRubyFZF < Minitest::Test
   def setup
     ENV.delete 'FZF_DEFAULT_SORT'
     ENV.delete 'FZF_DEFAULT_OPTS'